Our Work

Correlation of one-dimensional fatigue crack growth at cold-expanded holes using linear fracture mechanics and superposition

This work assesses the ability of linear elastic fracture mechanics (LEFM) with superposition to correlate the growth of one-dimensional fatigue cracks at cold-expanded open holes under constant amplitude loading. Care is taken in the work to accurately: control the test setup to ensure one-dimensional crack growth, determine residual stress in the coupons, measure crack growth, determine the fatigue crack growth rate (FCGR), compute stress intensity factors, and correlate fatigue crack growth rate with stress intensity factor range ΔK and stress ratio R.

Link
Author’s version

Case studies

TrueSlot® – near surface residual stress measurement ExpressRS® – expedited residual stress results Strain Gaging Services Residual Stress DART – automated residual stress measurement Mechanical stress relief of aluminum alloys Rapid Forge Design Aluminum forging quench modeling Machining distortion modeling with multi-step models including residual stress BAMpF®

Technical Publications

Measurement-driven, model-based estimation of residual stress and its effect on fatigue crack growth. Part 2: fatigue crack growth testing and modeling Measurement-driven, model-based estimation of residual stress and its effects on fatigue crack growth. Part 1: validation of an eigenstrain model Near Surface Residual Stress Measurement Using Slotting Measurement Layout for Residual Stress Mapping Using Slitting Precision of Hole-Drilling Residual Stress Depth Profile Measurements and an Updated Uncertainty Estimator An Uncertainty Estimator for Slitting Method Residual Stress Measurements Including the Influence of Regularization Validation of a Contour Method Single-Measurement Uncertainty Estimator Repeatability of Contour Method Residual Stress Measurements for a Range of Materials, Processes, and Geometries PSR Biaxial Residual Stress Mapping Validation The Contour Method (book chapter)